Sucking Machine&Fan Feeding Machine (ESF005-4C)
|FOB Price:||Get Latest Price|
|Min. Order:||1 Piece|
|Production Capacity:||200 PCS/Month|
|Transport Package:||Wooden Packing, Wooden Crate|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: ESF005-4C
- Size(L*W*H): 800*700*1000mm
- Origin;: China
- Trademark: XINQUNLI
- Origin: Shenzhen. China
- Model: Esf005-4c
- Weight: 90kg
- Power;: 4.0kw
- Specification: First grade product
- HS Code: 84531000
(1),Only qualified operator to operate this machine.
(2),Before installation debug completed, don't connect to power supply.
(3),You're forbidden to put hands into the feeding ducts machine, when operating.
(1),Power supply 380V/50Hz
(2),Motor power 7.5Kw
(5),Sifted net diameter 25mm,in addition,20mm and 30mmm for choice.
(1),Install the machine on hard, flat surface, fix it to ground or add a rubber mat if necessary.
(2),Magnetic set-up machine should be separated with the installation of machine.
(3),Attention whether the power supply is accordant with local power supply.
(4),Make sure the machine is connected to the ground.
(5),Attention to revolve orientation of the motor and to see if it is anti-clock wise from up to down.
(1),Turn on the switch, the operation of foam shredder is allowed, after the running of the machine is stable.
(2),the input of ducts required to be average, less ones, more feeding times, for the larger and longer ones, you should re-cut them to smaller and shorter ones.
(3),you're forbidden to put into the ducts, such as metal,cloths,fur,and so on.
(4),It's normal with some noise or vibration, when operating.
(5),clean off the foams stopped in sifted web in time, but do it when the machine is stopped running.
1) THE INSTALLATION & THE EXCHANGE OF SIFTED WEB:
According to the different needs of production,the machine can be used with coarse or tenuous sifted web, with different sizes of sifted web, it can change the sizes of foam. When installing the sifted web, you must cut off the power supply, and take apart clamp, then elicit the sifted web, install the right ones.
2). CHANGE OF THE BLADE:
If the blade becomes not so sharp after several times of use, you can sharpen the blade or change the head of blade. The steps as follows:
(1).Take off the input duct
(2).Take off axes, which connects principal axis with blade rest, and change the blade rest. Attention it is symmetrical assemblage. Assure that their weights are equal, so that to assure the balance.
3).Adding lubricant on time